安部 洋平(あべ ようへい)
所属 | 機械工学系 |
---|---|
職名 | 准教授 |
専門分野 | 塑性加工 / 塑性接合 |
学位 | 工学博士(豊橋技術科学大学) |
所属学会 | 日本機械学会 / 日本塑性加工学会 / 自動車技術会 / 日本鉄鋼協会 |
abe@me ※アドレスの末尾に「.tut.ac.jp」を補完してください |
|
研究室web | http://plast.me.tut.ac.jp/ |
研究者情報(researchmap) | 研究者情報 |
研究テーマ(シーズ1)
高張力鋼板,超高張力鋼板の冷間プレス成形
研究の技術分野 | 機械 金属・材料 |
---|---|
キーワード | 高張力鋼板,超高張力鋼板,プレス成形 |
提案者 | 安部洋平 |
連絡先 | E-mail:abe@plast.me.tut.ac.jp URL :http://plast.me.tut.ac.jp/ |
主要な研究設備等
サーボプレス(150tonf, 80tonf),精密万能試験機(1, 25tonf),材料試験機(100tonf),小型圧延機,走査電子顕微鏡,デジタルマイクロスコープ,デジタル光学顕微鏡,デジタル表面粗さ測定器,レーザー式3次元形状測定器,サーモグラフィー,疲労試験機,平面曲げ疲労試験,高速度カメラ,
基本となる特許・開設記事・研究論文等
1) Y. Abe, T. Ohmi, K. Mori, T. MasudaImprovement of Formability in Deep Drawing of Ultra-High Strength Steel Sheets by Coating of Die, Journal of Materials Processing Technology, 214-9 (2014), 1838-1843.
2) 安部洋平,渡部沙春,Zamzuri HAMEDON,森 謙一郎,超高張力鋼板の縮みフランジ変形における逐次接触パンチによるしわの抑制,塑性と加工,55-639 (2014), 341-345.
3) K. Mori, Y. Abe, Y. Kidoma, P. Kadarno, Slight clearance punching of ultra-high strength steel sheets using punch having small round edge, International Journal of Machine Tools and Manufacture, 65 (2013), 41-46.
4) 安部洋平,中野下茂広,森謙一郎,P. Kadarno, 傾斜した超高張力鋼板の直接穴抜き加工,塑性と加工,54-627 (2013), 348-352.
5) Y. Abe, K. Mori, K. Norita, Gradually contacting punch for improving stretch flangeability of ultra-high strength steel sheets, CIRP Annals, 62-1 (2013), 263-266.
6) K. Mori, Y. Abe, K. Norita, Improvement of stretch flangeability of ultra-high strength sheets by gradually contacting punch, Proceedings of 11th International Conference on Numerical Methods in Industrial Forming Processes, AIP Conf. Proc. 1532, (2013), 122-127.
978-983.
7) P. Kadarno, K. Mori, Y. Abe, Two-stage plate forging for thickening hole edge of punched high strength steel sheet, Proc. 14th International Conference on Metal Forming, Krakow, 899-902.
8) 安部洋平,池田豊,森謙一郎,超高張力鋼板の破断面平滑加工による穴広げ性の向上,塑性と加工,52-603 (2011), 485-489.
9) 安部洋平,乘田克哉,森謙一郎,逐次接触パンチによる超高張力鋼板の伸びフランジ成形性の向上,塑性と加工,52-604 (2011), 569-573.
10) K. Mori, Y. Abe, Y. Ikeda, Improvement of formability for expansion of punched hole of ultra-high strength steel sheets by smoothing of sheared edge, Steel Research International, Special Edition, (2011), 604-609.
実施可能な共同研究の形態
共同研究の実施形態 :大学と企業の両方で実施
大学への研究員等の受入 :可能