fontsize
Search

Undergraduate and Graduate Schools

Home > Undergraduate and Graduate Schools > Faculty Members List > Department of Mechanical Engineering > FUMIE ABE

FUMIE ABE

Affiliation Department of Mechanical Engineering
Title Assistant Professor
Fields of Research Manufacturing Processes / Forming Processes
Degree Doctor of Engineering (Osaka University)
Academic Societies The Japan Society for Technology of Plasticity
E-mail f-abe@plast.me
Please append ".tut.ac.jp" to the end of the address above.
Laboratory website URL http://plast.me.tut.ac.jp/

Theme1:Stady of Selective Laser Melting Process

Selected publications and works

・ F. Abe, K. Osakada, Fundamental Study of Laser Rapid Prototyping for Metallic Parts, Int. Journal of Japan Society of Precision Engineering, 30-3 (1996), 278-279.
・ F. Abe, A. Yoshidome, K. Osakada, M. Shiomi, Direct Manufacturing of Metallic Model by Laser Rapid Prototyping, International Journal of Japan Society of Precision Engineering, 32-3 (1998), 221-222.
・ M. Shiomi, A. Yoshidome, F. Abe, K. Osakada, Finite Element Analysis of Melting and Solidifying Processes in Laser Rapid Prototyping of Metallic Powders, International Journal of Machine Tools and Manufacture, 39-2 (1999), 237-252.
・ F. Abe, K. Osakada, M. Shiomi, K. Uematsu, M. Matsumoto, The Manufacturing of Hard Tools from Metallic Powders by Selective Laser Melting, Journal of Materials Processing Technology, 111 (2001), 210-213.
・ M. Matsumoto, M. Shiomi, K. Osakada, F. Abe, Finite Element Analysis of Single Layer Forming on Metallic Powder Bed in Rapid Prototyping by Selective Laser Processing, International Journal of Machine Tools and Manufacture, 42-1 (2002), 61-67.
・ F. Abe, E.C. Santos, Y. Kitamura, K. Osakada, M. Shiomi, Influence of Forming Conditions on the Titanium Model in Rapid Prototyping with the Selective Laser Melting Process, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 217-1 (2003), 119-126.
・ M. Shiomi, K. Osakada, K. Nakamura, T. Yamashita, F. Abe, Residual Stress within Metallic Model Made by Selective Laser Melting Process, Annals of the CIRP, 53-1 (2004), 195-198.
・ E.C. Santos, M. Shiomi, K. Osakada, Y. Kitamura, F. Abe, Microstructure and Mechanical Properties of Pure Titanium Models Fabricated by Selective Laser Melting, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 218-7 (2004), 711-719.
・ T. Laoui, E.C. Santos, K. Osakada, M. Shiomi, M. Morita, S.K. Shaik, N.K. Tolochko, F. Abe, M. Takahashi, Properties of Titanium Dental Implant Models Made by Laser Processing, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 220-6 (2006), 857-863.
・ F. Abe, K. Osakada, A Study of Laser Prototyping for Direct Manufacturing of Dies from Metallic Powders, Advanced Technology of Plasticity 1996 (ed. T. Altan), Vol.2, Proc. 5th ICTP, (1996), 923-926.
・ M. Shiomi, A. Yoshidome, K. Osakada, F. Abe, Finite Element Simulation of Solidification Process of Metallic Powders in Laser Rapid Prototyping, Proc. the 8th Modelling of Casting, Welding and Advanced Solidification Processes VIII, (ed. B. G. Thomas et al.), TMS, (1998), 697-704.
・ F. Abe, K. Osakada, M. Shiomi, K. Uematsu, M. Matsumoto, Manufacturing of Hard Tools from Metallic Powders by Selective Laser Melting, Proc. AFDM’99, (1999).
・ F. Abe, K. Osakada, K. Uematsu, M. Shiomi, Direct Manufacturing of Metallic Tools by Laser Rapid Prototyping, Advanced Technology of Plasticity 1999 (ed. M. Geiger), Vol. 2, Proc. 6th ICTP, (1999), 1005-1010.
・ F. Abe, K. Osakada, Y. Kitamura, M. Matsumoto, M. Shiomi, Manufacturing of Titanium Parts for Medical Purposes by Selective Laser Melting, Proc. 8th Int. Conf. on Rapid Prototyping, Tokyo, (2000), 288-293.
・ M. Shiomi, M. Matsumoto, K. Osakada, F. Abe, Two-Dimensional Finite Element Simulation of Laser Rapid Prototyping, Proc. Simulation of Materials Processing: Theory, Methods and Applications, (K. Mori ed.), Balkema, (2001), 1059-1064.
・ E.C. Santos, F. Abe, Y. Kitamura, K. Osakada, M. Shiomi, Mechanical Properties of Pure Titanium Models Processed by Selective Laser Melting, Proc. The 13th Solid Freeform Fabrication Symposium (SFFS), Texas, (2002), 180-186.
・ E.C. Santos, K. Osakada, M. Shiomi, M. Morita, F. Abe, Fabrication of titanium dental implants by selective laser melting, Proc. SPIE - The International Society for Optical Engineering, 5662, (2004), 268-273.
・ T. Laoui, E.C. Santos, K. Osakada, M. Shiomi, M. Morita, S.K. Shaik, N.K. Tolochko, F. Abe, Properties of Titanium Implant Models Made by Laser Processing, Proc. 4th Int. Conf. Laser Assisted Net Shape Engineering (LANE 2004), Erlangen-Nuremberg, Germany, (2004), 475-484.

Keywords

Selective laser melting; Metallic powder; Titanium; Laser; 3D printing; Additive Manufacturing

Theme2:Stady of new forging system by 3D printing

Keywords

3D printer, try, die

Title of class

Machine Fundamental Experiments of Engineering(B11510110)
Experimental Practice for Mechanical Engineering(B11610021,B11610023)


to Page top